Parts & Accessories

Looking for a great around town lighting system at a very reasonable price? The Duplex is just that. Providing both headlight and rear light in one unit, the Duplex easily mounts to your helmet with an included rubber strap and provides up to 100 hours of run time on only two AAA batteries. The light is easy to operate and can be switched between constant beam and flashing modes simply by pressing and holding a button. Making yourself visible in city traffic can help motorists see you better, and a good helmet-mounted light that is worn on your head, up and away from the distraction of car lights, can really make you stand out in a sea of vehicles. Use your head, and use a light. Features - Dimensions: 70.5 x 28.5 x 23 mm - Weight: 51.5 g (with bracket and batteries) - Light source: White LED x1, Red LED x1 - Battery: AAA alkaline battery x2 - Mount: Rubber band (Long) Modes/Run Time - (Front) Constant mode (15 lumens): 100hrs - (Rear) Constant mode (10 lumens): 100hrs - (Front) Flashing mode (30 lumens): 100hrs - (Rear) Flashing mode (10 lumens): 100hrs

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

- Replacement charging cable - Used for: Street, Kickstart, Matrix helmets & Lumos remote

- Replacement padding for Kickstart and Kickstart Lite

- Replacement padding for Lumos Matrix and Street helmets

Handlebar mount for Lumos remote

Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination. Featuring: - 600 Lumen Output Certified to the FL-1 Standard - Daylight Visible Pulse Mode - Integrated Battery Pack With Red Rear Lighting - Innovative Amber Sidelights Provides Critical Side Visibility at Intersections - Ultra-lightweight Setup With Easy Clip On/Off Design - Waterproof to 1 meter For All-Conditions Reliability - Accurate Battery Charge & Status Indicator - Micro USB Rechargeable Included: - Helmet Mounts & Micro USB Charging Cable

Replacement fit system for Leatt DBX 1.0/2.0 Helmets

A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System. - COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS - BATTERY TYPE: LR41 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: ATS dial - WEIGHT: 15g - MATERIAL: Nylon

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS - ATTACHMENT: Blade or Blade+ helmet - WEIGHT: 45g - MATERIAL: Polycarbonate

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Z1 MIPS, Z1 - ATTACHMENT: Z1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate

Replacement Pads for Lazer's BOB Helmet

Magnetic mount lens for Lazer Bullet 2.0 helmet. The integrated lens is an integral part of the Bullet 2.0 helmet. It can be stored on the helmet surface using the magnetic docking when not in use. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: magnetic - WEIGHT: 24g - MATERIAL: Polycarbonate

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Screws for Impala visor. - COMPATIBILITY: Impala MIPS, Impala - WEIGHT: 1g - MATERIAL: Aluminum

Camera mount for Jackal and Impala helmets. - COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala - ATTACHMENT: Velcro - WEIGHT: 13g - MATERIAL: Nylon

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad. - COMPATIBILITY: Cameleon MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Coyote and Coyote MIPS helmets. Set includes three pads - One front/top pad and two top side pads. - COMPATIBILITY: Coyote MIPS, Coyote - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Freshen up the interior of your helmet with a new pad set! - Replacement pads for Jackal helmets

Freshen up the interior of your helmet with a new pad set! - Replacement pads for Sphere helmets - Attachment: Velcro - Material: Foam

Freshen up the interior of your helmet with a new pad set! Replacement padset for Lazer Urbanize MIPS helmets. Set includes two pads - one front pad and one top center pad COMPATIBILITY - Urbanize MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Screws for Jackal Visor

Strap divider for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon

Strap divider for thin Lazer helmet straps COMPATIBILITY - Bullet 2.0 - G1 MIPS - G1 - Z1 MIPS - Z1 - Century MIPS - Century - Victor - Wasp Air Tri - Impala - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon

Strap dividers for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - MATERIAL: Nylon

Visor for Coyote helmet COMPATIBILITY - Coyote MIPS - Coyote - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon

Visor for Impala helmet COMPATIBILITY - Impala MIPS - Impala - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon

- Replacement X-Static pads for Lazer's Wasp Air Helmet - X-Static pads are an anti-microbial, self-cleaning pad system